Latest News

    • Learn to Weave: Tips and Advice from Etsy Experts

      0 / 17 May 2015

      My mother is a weaver, so the apartment I lived in as a kid had a loom that took up half of our living room. Growing up, I loved sitting on the ground and watching the loom’s pedals going up and down, with the sound of the shuttle moving back and forth as she worked. Since then, I have often dreamed about having that loom back in my life. But in the meantime, I’ve learned that you don’t need to invest in a large professional loom to learn the basics of weaving. You can make your own loom out of a simple piece of re-used cardboard instead! You Will Need: Cardboard Packing tape Masking tape Ruler Permanent marker Craft knife Scissors Large needle Twine Yarn Optional Embellishments: Sequin Ribbon Rhinestone Ribbon Beads Leather Driftwood Step 1: Make Your Loom Before we get started, it’s important to note that the size of your cardboard will determine the size of your finished weaving. For this project, I used a piece of cardboard that is 5″ x 12″. When you’re ready to begin, tape the top and bottom of your cardboard with packing tape. This will make your loom stronger. With your ruler, mark two lines along the top of your cardboard that are 3/4 of an inch from each side. Next, mark a line every 1/2 inch from those points until you have 10 lines total along the top of your loom. Repeat this step on the bottom. Cut along the lines with your scalpel to create notches. Tape the end of the twine to the back of your cardboard. Fit the twine through the first notch at the top and down the cardboard to the first notch on the bottom. Keep the twine taught and continue wrapping up and down through the notches until you have reached the other end. Cut the twine and tape the end to the cardboard. Step 2: Weave Cut about 1 yard of yarn and thread your needle. Guide the threaded needle through the twine using an over-under pattern, being sure to leave a 5″ tail at the end. After the first row, guide your needle back through the twine using an under-over pattern. Tip: Try not to pull your yarn too tight (or too loose) or your weaving will start to look wonky! Continue weaving back and forth until you’re satisfied with the amount you have woven. When you’re ready to try another color or pattern, push the woven section up with your fingers to tighten. Cut the yarn, being sure to leave another 5″ tail. Step 3: Rya To create the Rya, or “fluff” in the weaving, cut several 4″ pieces of yarn. Lay the first piece in a “U” shape over the first two pieces of vertical twine. Wrap the ends under the twine and pull them up until the piece of yarn meets your basic weaving pattern. Repeat on the third and fourth pieces of twine, the fifth and sixth pieces (and so on) until you have a row. For the second row, skip the first piece of twine and wrap your yarn under the second and third piece of twine. Repeat on the fourth and fifth pieces of twine (and so on) until you have completed the second row. Continue alternating rows until you have about an inch of fluff, being sure to push it up with your fingers after each row so it’s nice and tight. When you’re ready to go back to weaving, simply continue the over-under pattern from step two, alternating colors as you like. Step 4: Add Embellishments Now it’s time to experiment with all kinds of embellishments – from leather and driftwood to ribbon and beads. Glide the leather (or driftwood or ribbon) under and over the twine. Continue weaving with yarn to hold it in. To add a bead, simply string it on your yarn at any point and continue weaving. Step 5: Finishing Touches When you reach the bottom of your loom, it’s time to finish the edges of your weaving. Start by threading each tail of yarn through your needle and sewing it through the weaving. Snip the excess. Next, trim your fringe so the yarn is about an inch tall. Finally, turn your loom around and untape the tails of your twine. Cut the twine along the middle of your cardboard. Flip the loom back over and remove the first two pieces of twine from the cardboard. Tie them together with a square knot and repeat with the following two pieces of yarn (and so on) until you have knotted all of the twine. Take two pieces of twine at the top ends of your weaving and tie them together. Trim the extra twine hanging from the bottom of your loom, and there you have it: a handwoven composition that’s ready to hang! I had such a great time with the weaving I made for this tutorial that I ended up making a second one with different embellishments and colors. When you have your finished piece, you can either hang it from its string or frame it behind glass for all to see. Personally, I like to hang mine using washi tape for an added pop of color.

    • How-Tuesday: Halloween Fringe Banner

      0 / 17 May 2015

    • How-Tuesday: Make a Fiber Art Wall Hanging

      0 / 17 May 2015

    • How-Tuesday: Nautical Knot Bracelets

      0 / 17 May 2015

    • Make a Crystal-Topped Jewelry Box

      0 / 17 May 2015

    • Make an Upcycled Cardboard Lantern

      0 / 17 May 2015

    • Learn to Weave

      0 / 17 May 2015

    • Make a Bright Boho Purse Charm

      0 / 17 May 2015

    • Craft a Colorful Rope Lampshade

      0 / 17 May 2015

    • Make a Colorful Paper Weaving

      0 / 17 May 2015
Sunday, 17 May 2015
Home > Papercraft > Make a Colorful Paper Weaving

Make a Colorful Paper Weaving



If you’re looking for an approachable way to make visually striking and totally frame-worthy original artwork, paper weaving — a fun update on the textile-weaving trend — just might be for you. Combine your favorite images with embellishments like ribbon, yarn, colored paper, magazine pages, or even your child’s artwork, and you’ll have a one-of-a-kind statement piece to display in your home. It’s so easy even a kid could do it (just grab the safety scissors first!).
Supplies
You will need:
  • 2 photos of your choice, blown up and printed on 8 1/2″ x 11″ paper
  • Paper weaving templates
  • Scissors
  • 4 small binder clips
  • Scotch tape
  • Glue stick (not pictured)
  • Optional: ribbon, yarn, colored paper or fabric
1
Download and print the paper weaving templates. You will also need to print two images of your choice on 8 1/2″ x 11″ paper; I used some of my Instagram photos for this project, but you could also purchase and download digital images from sellers right here on Etsy. Make sure to size the images so that they fill the entire page.
compo1
Place the diagonal-line template on top of one of your photos and the vertical-line template on the other. Note: The white template borders should be on the top and left sides. Secure the templates to the photos using binder clips.
6
Following the lines of the diagonal template, cut through both the template and the image, making sure to stop cutting where the lines of the template end.
9
When you’ve finished cutting, remove the binder clips and set the image aside.
8
Next, cut along the lines of your vertical template and photo.
10
Tip: Keep the vertical strips in their original order as you cut through this second photo. (You should still be able to make out the image when you’re done.)
11
12
Now you’re ready to combine the two images. Starting from the left, grab one strip from the vertically cut image and guide it through the diagonally cut image using an “over-under” pattern.
13
Push the woven strip all the way to the left and make sure its top and bottom edges line up with those of the diagonally cut image. Then grab a second strip and weave it through using the opposite of the pattern you just used (so go “under-over” this time).
14
Continue weaving more paper strips, alternating between the over-under and under-over patterns. Feel free to add in other embellishments like fabric strips or colored paper, and keep going until your weaving is complete.
15
Once you’ve finished weaving, secure the layers with binder clips.
16
Next, flip the whole thing over and apply Scotch tape along the edges.
17
Trim excess paper with scissors, if needed.
18 Product
Tip: For a more secure fit and cleaner edges, use glue stick to secure any loose ends.
In Situ Vertical
Last but not least, add a frame to your new paper weaving and hang it in your home or office.
Posted by at 11:50
Next
Craft a Colorful Rope Lampshade
Previous
This is the last post.

Related Posts

    • Blogger Comments
    • Facebook Comments

    0 comments:

    Post a Comment

    Item Reviewed: Make a Colorful Paper Weaving Description: Rating: 5 Reviewed By: Unknown
    Subscribe to: Post Comments (Atom)